Dual Band HT, Receiver, Filter and more FS


Ken, W8EK
 

Kenwood Dual Band HT, SW Receiver, CW Filter,
Mobile mount, Extension feet, and more For Sale

.

Kenwood TH-G71 Dual Band HT:

The Kenwood TH-G71A is a dual bander with all
the right features.

Besides being easy to use, the TH-G71A also
boasts power up to 6 watts (VHF) or 5.5 (UHF)
with external power. You also get .5 W or .05 W.
200 memory channels, with six alphanumeric
characters. Multiple scan functions are available.

It includes the PB-39 high powered battery,
BC-17 AC Charger, Belt Clip and SMA flexible
antenna. Only 2.3 x 4.5 x 1.3 inches.

Features:
200 Alpha Memories
Key Illumination
Multi Scanning Modes
Built-in encode/decode
Easy to use menu
3 RF Out Levels

This one looks like new, and works the same.
In includes a PB-39 H, high capacity 1450 Mahr
battery plus the regular one. Both hold a
charge and work well.

This one also includes the BP-19 desk charger,
and the wall wart charger.

With paper work for $145.

.

Kenwood R-2000 Collectible Receiver:

The Kenwood R-2000 offers many advanced
capabilities. It succeeds the R-600 and R-1000.
The R-2000 tunes from 100 to 29999.9 kHz in
five modes (AM, FM, USB, LSB, and CW).

A noise blanker, four position attenuator,
AGC and all mode squelch are included.

The ten channel memory stores frequency and
mode. The band-scan mode permits the R-2000
to scan between two user selected frequencies.

The seven digit digital display indicates
frequency to the nearest 100 Hz, and has a
dimmer switch. The dual 24 hour quartz
digital clock-timer can activate the radio and
an auxiliary device (recorder, etc.).

The large front mounted speaker sounds
great. The rear panel has input for coaxial
or hi-Z wire antennas. 120 VAC.

This one is pristine. It works like it should,
and looks like it just came out of the box,
new. Collectible quality.

Buy it with paper work for $375.

.

Kenwood YK-88 SN Crystal Filter:

This filter is used in rigs such as the
TS-430, TS-440, and others.

It is the solder in type.

It works fine. It looks fine also, as
if that matters for a filter inside the rig.

Kenwood YK-88 SN, 1800 Hz SSB Filter
This is the narrow SSB filter, that can
also be used for wide CW.

$79

.

Kenwood MB-430 Mobile Bracket:

The Kenwood MB-430 is the mobile bracket
that is used to mount the Kenwood TS-430,
TS-440, TS-450, R-5000 and maybe others.

This one is in nice shape and includes
the four screws (and washers) for attaching
it to the rig.

These are no longer made and are somewhat
rare.

Buy this one for $45.

.

10 meter Crystals for Kenwood HF Rigs:

These crystals work in the Kenwood TS-820
for sure (they have been tested in a TS-820),
and probably will also work in most of the
other Kenwood "Hybrid" rigs. Please check
your manual.

Set of three crystals
These crystals will restore all three 10 meter
segments. They are used after someone
"converted" your rig to 11 meters, and you
would like it back on 10 meters.
They simply plug in, so no difficult surgery is
needed.

$35 plus shipping for the set of three.

.

Linear Amp Switching Cables for Kenwood Rigs:

This cable goes from a Kenwood transceiver to a linear
amplifier to switch the amp from transmit to receive.

One end has a DIN connector, as is used with most Kenwood
rigs. The other end has an RCA phono plug, as used by most
linear amplifiers.

Before using this cable, please check the switching
capabilities of your transceiver, and the requirements
of your amplifier.

Cable for switching the T/R relay Only $15.

Cable with ALC control, in addition to T/R switching. $20

.

I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, connectors, miscellaneous accessories,
etc.
Just too many to list here. Please e-mail your requests.

.
Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400






.

Join main@Kenwood-radios.groups.io to automatically receive all group messages.